Workpiece：
Product parameters：
| Nominal pressure | 630kN |
| Straightening diameter range | φ50-φ140 |
| Workpiece quality | 10-100kg |
| Shaft tube wall thickness | 2.5-8mm |
| Chief of the straight line | ≤2300mm |
| Workbench specifications | 65×500×3710 |
| Main cylinder bore × rod diameter × stroke (double rod adjustable) | φ100×φ25×125（50） |
| Characteristics | It is a heavy-duty special straightening hydraulic press, mainly used for the alignment and inspection of heavy-duty vehicle drive shafts. The V-type tooling supports the workpiece, and the tops of the two tailstocks are pressed against the two ends of the workpiece. The hydraulic machine drives the cylinder rod of the hydraulic cylinder to apply pressure to the workpiece to correct the workpiece. |
